Over the past few years has increased the popularity of floor convectors. We are not talking about the system of floor heating throughout the area, but about convectors located in the floor in crucial areas of interior, which is not possible to install traditional radiators, gutters, stainless steel heat exchanger for hot water. Convector can be as a fan, which increases its heat output, and without it. In the first place use of convectors justified next to large windows on the lower floor, transitions in the room with multi-temperature, output, winter gardens, swimming pools, showrooms, etc. Floor convector play the role of the heat shield from cold windows, walls and other surfaces, and thereby prevent condensation, eliminate sharp changes in temperature in the room and thereby increase the thermal comfort. On the market represented quite a lot of producers Floor convector as foreign (Kampmann, Jaga, etc.) and domestic (Isoterm, Eva, etc.).

When selecting the manufacturer of the convector, buyers often use a single rule – if convector import, especially if it is produced in Germany, then it is better. With this statement hard to argue, however competent the buyer must always pay attention to the specifications of the goods, as well as on value for money. And precisely because of these characteristics, we can conclude that the buy convector heating, assembled in Russia from imported parts cheaper than overpay for imported assembly. In addition, delivery system of import convectors are 2-3 months vs. 3-4 days. And this in turn could delay construction and disrupt production time assembly work at obekte.Takim way, in our opinion, the most optimal in terms of purchase the manufacturer of floor convectors is a plant eva. The range of the manufacturer has a large range of products includes both convectors with fan (EVA coil kb, eva coil kbo, eva coil KB-80), and convectors without fan (EVA coil K, eva coil kt, eva coil ko,), as well as parapet convector with oak worktop (EVA coil KBP), installed in place of the sill. You can select multiple competitive advantages of products EVA: Fan coil units are equipped with Eva tangential fans with a safe voltage of 12V, the application of tangential fan ensures uniform flow of heated air along the length of the fan; Use the fan 12B allows for the fan coil in humid environment.

Eva heated by convectors and fan off; capacity convectors with fans can pick up so that the inclusion of the fan occurred only at high frost, and the rest of the time the device worked without a fan. Housing (trough) convector heating Eve is made of stainless steel instead of Galvanized, like most manufacturers. Convectors Eva winter working on the heat in the summer some models can be used to chill for a partial cooling facilities; such a function is achieved in the presence of conditioning on the base unit (a water-cooled unit). Minimum overall height for the installation of the convector to the floor is 88 mm (convector eva coil KB-80), the standard height – 125mm (for convectors eva coil K, eva coil KT). When required, it can manufacture custom sizes convectors, with production times are increased by 3-4 days in most cases is insignificant. Fan speed produced by thermostats Eve: manual 3-speed control (EVA-B), automatic 2-speed control (EVA-C), automatic 2-speed control with night mode (EVA-H). By connecting to the heat exchangers heating system with flexible podvodok (supplied), it is possible convenient cleaning gutters convector. Due to the large stock of convectors in stock manufacturer, supply of equipment is in within 2-4 dney.Material prepared by staff, llc EkvoKlimat '